|
|
|
This urethane alkyd enamel provides superior exterior gloss and
color retention when compared to straight alkyds and epoxy
esters. For use on properly prepared interior & exterior metal
surfaces, such as metal buildings, fences, Bilco® doors, machinery,
piping, cabinets, storage tanks and equipment. This rust
preventative coating can be applied directly to ferrous metal or
used in combination with a Benjamin Moore® metal primer.
View Details
|
|
|
|
|
|
|
|
|
This two component epoxy primer is formulated to protect clean
or pretreated metal which is exposed to corrosive environments.
This corrosion and chemical resistant primer can be used on
interior or exterior surfaces. This epoxy primer provides the
foundation necessary to support high performance epoxy or
urethane top coat systems.
View Details
|
|
|
|
|
|
|
|
|
Interior/Exterior primer for ferrous metal substrates such as
structural steel, metal buildings, fences, equipment, stairs,
railings, and general maintenance painting. Provides
excellent long term corrosion control and outstanding
adhesion properties. The ability to penetrate provides good
performance over hand or power tool cleaned surfaces.
View Details
|
|
|
|
|
|
|
|
|
Bonding Primer (M15) is a clear-blue primer, designed for aluminum and galvanized metal, is easy to apply, fast drying, and can be recoated quickly. This unique primer is designed with extremely tenacious adhesion, making it possible to achieve a tightly bonded finish to any non-ferrous metal or hard to stick surfaces such as porcelain, glass, Formica® (or laminates), baked on finishes or other non-porous surfaces.
View Details
|
|
|
|
|
|
|
|
|
This two-component epoxy block filler will provide the required filling properties on coarse masonry, brick walls or concrete block. It will also provide the bonding properties needed to support any two component product when used on high abuse surfaces, high moisture areas or below grade applications. May be top coated with most generic coatings and cleans up with soap and water. This product has a useable pot life of 6 to 8 hours at 70° F.
View Details
|
|
|
|
|
|
|
|
This product is designed to perform a dual purpose as a direct to metal primer and as a tough durable finish coat. Both coats of this product provide rust inhibition for superior corrosion control. This semi-gloss finish hides most surface imperfections while providing good color and sheen retention on both interior or exterior surfaces. Uncoated ferrous metal must receive a minimum of two coats for adequate corrosion control.
View Details
|
|
|
|
|
|
|
|
|
This two-component epoxy block filler will provide the required
filling properties on coarse masonry, brick walls or concrete block. It will also provide the bonding properties needed to support any
two component product when used on high abuse surfaces, high
moisture areas or below grade applications. May be top coated
with most generic coatings and cleans up with soap and water.
This product has a useable pot life of 6 to 8 hours at 70° F.
View Details
|
|
|
|
|
|
|
|
|
This acrylic latex coating features easy application; rapid dry; soap and water clean up; blister, alkali fume and fade resistance; and exceptional durability. Suitable for use as a primer/sealer or as a protective clear coating over low gloss acrylic coatings for added durability. Low odor, Low VOC, does not lift conventional coatings.
View Details
|
|
|
|
|
|
|
|
|
This quick dry universal primer is formulated for use under many
generic types of finish coats. It offers excellent rust inhibition and
good adhesion. The coating serves as a barrier coat which will
keep hot solvent from attacking conventional coatings. This
primer performs well when priming is essential before the generic
type of the finish coat has been chosen.
View Details
|
|
|
|
|
|
|
|
This quick dry universal primer is formulated for use under many
generic types of finish coats. It offers excellent rust inhibition and
good adhesion. The coating serves as a barrier coat which will
keep hot solvent from attacking conventional coatings. This
primer performs well when priming is essential before the generic
type of the finish coat has been chosen.
View Details
|
|
|
|
|
|
|
|
|
This fast dry primer provides wetting properties necessary for
bonding to hand and power tool cleaned surfaces. It can be used as
a shop primer for fabricated steel or a general purpose metal
primer.
View Details
|
|
|
|
|
|
|
|
|
This product is designed to perform a dual purpose as a direct to
metal primer and finish. Both coats of the product provide rust
inhibition for superior corrosion control. This product provides
good color and gloss retention on both interior and exterior
surfaces.
View Details
|
|
|
|
|
|
|
|
|
This acrylic coating features easy application, rapid dry and is
blister, alkali fume and fade resistant. Suitable for use as a
primer/sealer or as a protective clear coating over low gloss acrylic
coatings. As a sealer on masonry it reduces water penetration
helping to prevent erosion, efflorescence, chalking, and spalling without changing the natural appearance.
View Details
|
|
|
|
|
|
|
|
|
Designed to fill pores, voids, and surface imperfections of concrete block and other porous masonry surfaces prior to application of finish coats. May be top coated with any Benjamin Moore® coating. May be applied by airless spray, brush or long nap rollers.
View Details
|
|
|
|
|
|
|
|
|
This unique water-thinned, acrylic primer minimizes flash rusting and protects the steel from corrosion. Because it is water thinned, it has less odor and reduces the risk of fire hazard. This product eliminates the need for expensive solvents, and also performs well as a tie coat or barrier coat over zinc coated surfaces. This primer can be applied to damp surfaces, and adheres well to most hard-to-coat substrates. It can also be applied to poured or cast concrete and brick
View Details
|
|
|
|
|
|
|
|
|
This two component rust inhibitive primer provides an excellent chemical resistant base for high performance top coat systems. This water thinned formula is low odor making it a desirable primer for use in food processing areas or for application in areas where odor could be offensive.
View Details
|
|
|
|
|
|
|
|
|
A quality, vinyl acrylic latex wall surfacer. Designed to be used as a heavily applied preparatory coat necessary to ensure the better appearance of newly applied drywall compound. Prep-Coat is especially useful over joints lines and minor sanding grooves.
View Details
|
|
|
|
|
|
|
|
|
This product is designed to perform a dual purpose as a direct-to-metal
primer and as a tough, durable finish coat. Two coats of
this product provide rust inhibition for superior corrosion control.
Uncoated ferrous metal must receive a minimum of two coats for
adequate corrosion control.
View Details
|
|
|
|
|
|
|
|
|
This quick dry universal primer is formulated for use under many generic type finish coats. It offers excellent rust inhibition and good adhesion, both of which contribute to extended coating life. This coating serves as a barrier coat which will keep hot solvent coatings from attacking conventional coatings. This primer performs well when priming is essential before the generic type of finish coat has been chosen.
View Details
|
|
|
|
|
|
|
|
|
This modified alkyd primer permits same day finish coat application. Provides excellent long term corrosion control with outstanding adhesion properties. The ability to penetrate provides good performance over hand or power tool cleaned surfaces.
View Details
|
|
|
|
|
|
|
|
|
This unique waterborne, acrylic primer minimizes flash rusting and
protects steel from corrosion. Its low odor and low VOC formula
is ideal for use on interior and exterior ferrous and galvanized
metal. This primer can be applied to slightly damp surfaces and
adheres well to most hard to coat substrates. It can also be used
to prime masonry substrates.
View Details
|
|
|
|
|
USA
-> For Contractors
-> Visualisation optimale
-> Urethane Coatings
-> The Color Creators
-> Industrial Primers
