Find Local Store »

Canada -> For Your Home -> Learn How -> Fresco


E-mail to a Friend Add to Favourites Print

To give any wall in your house a mottled, parchment look, you can fresco in a fun and easy way with Benjamin Moore latex paints and glazing liquids. Because they are easy to clean and leave little odour, it has never been simpler to go fresco.

Tools and Supplies



  • 1 centimetre nap roller cover
  • 4 centimetre or 5 centimetre angular sash paint brush
  • Cheesecloth
  • Disposable latex gloves
  • Paint tray
  • Roller cage
  • Two stir sticks


Note: The amount of paint and the tools required depend on the square footage of your project. For guidance in calculating the size of your project, consult your local Benjamin Moore retailer.

Step 1 - Apply the Basecoat
Paint your wall(s) with a base coat of Cloud White OC-130. Allow at least 24 hours for it to dry.

Step 2 - Tape the Ceiling
Before applying the glaze mixture to your wall, apply tape to the ceiling and baseboard.
Step 3 - Pour Glaze into the Tray
Pour six parts of Glaze 405 Aquaglaze Latex Glazing Liquid into a paint tray.

Step 4 - Pour Paint into the Tray
Pour two parts of Roxbury Caramel HC-42 into the glaze in the right corner of the tray. Next, pour two parts of Barely Beige 1066 into the glaze in the left corner of the tray.

Step 5 - Mix the Paint with the Glaze
Use a stir stick to carefully mix the paint with the glaze in each corner of the tray, taking care not to mix the two colours together.

Step 6 - Load the Roller
Load your 1 centimetre nap roller in the paint tray, as you would for normal painting. Take care to keep the light end of the roller in the light paint mix, and the dark end of the roller in the dark paint mix.

Step 7 - Roll the Paint
Roll the paint randomly on your wall - left, right, up, and down - until you achieve the fresco effect. Blend away any harsh lines with a cheesecloth rag.

Step 8 - Brush into Corners
Use a 4 centimetre or 5 centimetre angular sash paint brush to apply paint in the corners and along your moulding and baseboards.

Helpful Hints:

  • When the paint tray is empty, remix the paint following steps one through five.
  • Allow approximately 12 hours for your wall(s) to dry completely before reassembling the room.
  • The fresco technique is great for hiding wall surface imperfections.
  • If you are unhappy with any sections of your wall, simply roll over them.
  • Avoid putting too much paint on the roller. The more paint you roll onto the surface, the more the colours will blend together. Do not substitute old sweatshirts or other fabrics for the cheesecloth - it is the cheesecloth that creates the texture you are after.
Top of Page