This two component epoxy offers excellent impact and abrasion resistance, plus has good acid and alkali resistance. For use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces. Examples include commercial and institutional walls, ceilings, machinery, piping, cabinets, storage tanks and high traffic floors.
This 100% solids epoxy floor coating was specially designed for
use as a protective coating, and for resurfacing and/or patching
high abuse floors. Advanced technology will provide a tough
coating with an attractive finish that is easy to maintain. Super
Spec HP® Anti-Slip Aggregate (P67) can be broadcast into the wet
film to create a skid-resistant surface.
A unique 100% solids epoxy sealer/finish that penetrates deeply
into concrete, and adheres tenaciously to otherwise hard-to-coat floor surfaces. This product is self priming and unlike many high
solids epoxy systems will hold on vertical surface like cove moldings and step faces.
This 100% solids epoxy floor coating was specially designed for use as a protective coating, resurfacing, and/or for patching surfaces exposed to severe and aggressive industrial environments. Advanced technology has provided us with a tough coating for high abuse areas and also an attractive finish that is easy to maintain. This film offers greater compressive strength than concrete and contains no solvent to cause shrinkage and fire hazard during application. Systems designed to squeegee, roller, brush, hand broadcast, or trowel application.
This two component epoxy offers unique features such as low fire hazard and application over slightly damp surfaces. It offers good color and gloss retention for use on exterior or interior surfaces, greatly improved chemical and abrasion resistance. Can be tinted to a wide range of custom colors. Can be applied over tight adhering conventional coatings. Available in two gloss levels: Use Catalyst M44-84 for a Gloss finish, or Catalyst M44-86 for a Semi-Gloss finish.
This two-component, self-priming, high-build epoxy offers exceptional adhesion over marginally prepared surfaces. It exhibits excellent flexibility and impact resistance, and provides excellent wetting that allows application over tight-adhering rust. The low solvent
content reduces pin-holing and lifting of conventional coatings. May be used as a high-build primer, intermediate coat or
for single coat applications.
This two-component acrylic epoxy is designed with many unique features; waterborne technology, low VOC, low odor, and low fire hazard. This acrylic epoxy is compatible with most existing coating systems. It can be applied over slightly damp surfaces. It offers excellent color and gloss retention with improved chemical and abrasion resistance. Available in two gloss levels: Use Catalyst 256-84 for a Gloss finish, or Catalyst 256-86 for a Semi-Gloss finish.
This 100% solids epoxy floor coating was specially designed for use as a protective coating, resurfacing, and/or for patching surfaces exposed to severe and aggressive industrial environments. Advanced technology has provided us with a tough coating for high abuse areas and also an attractive finish that is easy to maintain. This film offers greater compressive strength than concrete and contains no solvent to cause shrinkage and fire hazard during application. Systems designed for squeegee, roller, brush, hand broadcast, or trowel application.
This two-component high build epoxy is self-priming and has exceptional adhesion even over tightly adhering rust. It also has good flexibility and impact resistance, plus good wetting properties, almost eliminating undercutting at damaged areas. The high solids provide exceptional coverage and the low solvent reduces pinholes and lifting of conventional coatings. May be used as a high build primer, an intermediate coat or single coat interior applications. Minimum two coats for exterior applications. For immersion use in fresh or saltwater.
This two-component waterborne epoxy is ideal for use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces.
This product performs two roles: as a penetrating sealer that provides the proper foundation for high performance floor systems, and as a high performance clear finish coat. This product is formulated to tolerate some moisture in the substrate, such as areas that are slow drying. If this product is used as the total system, two or more coats should be applied.
This two component epoxy offers unique features such as low
odor and application over slightly damp surfaces. For use on
properly prepared interior & exterior ferrous metal, galvanized
metal, wood, plaster, masonry and drywall surfaces that are
subject to moderate abrasion or mild chemical exposures.
Examples include commercial and institutional walls, ceilings,
machinery, piping, cabinets, storage tanks and light traffic floors.
Available in two gloss levels: Use Catalyst P43-84 for a Gloss
finish, or Catalyst P43-86 for a Semi-Gloss finish.
