This urethane alkyd enamel provides superior exterior gloss and
color retention when compared to straight alkyds and epoxy
esters. For use on properly prepared interior & exterior metal
surfaces, such as metal buildings, fences, Bilco® doors, machinery,
piping, cabinets, storage tanks and equipment. This rust
preventative coating can be applied directly to ferrous metal or
used in combination with a Benjamin Moore® metal primer.
This urethane alkyd is superior to conventional alkyds when applied to surfaces that are intermittently exposed to light chemical environments. Provides better color and gloss retention than epoxy esters on exterior exposures. Provides good abrasion resistance on high traffic floor areas. Designed for interior or exterior application on metal, wood or concrete surfaces. Easily applied by brush, roller or various spray methods.
This high gloss single component epoxy ester enamel is designed to provide increased resistance to animal fats, oils, diluted acids and alkalies. Performs well when used for general maintenance painting for protecting surfaces in water and waste treatment plants, food processing plants, bottling plants, dairies and other areas exposed to high moisture or humidity.
This rapid dry gloss enamel is formulated for interior or exterior use on surfaces requiring a coating that dries to the touch in 30 minutes. Available in unlimited custom tinted colors. This product permits equipment to be coated while it is being repaired eliminating additional down time to allow paint to dry.
This rapid dry gloss enamel is formulated for interior or exterior use on surfaces requiring a coating that dries to the touch in 15 minutes. Available in standard colors and unlimited custom tinted colors. This product permits equipment to be coated while it is being repaired eliminating additional down time to allow paint to dry. For additional gloss, chemical and abrasion resistance add 1pint of M76 Gloss & Hardness Enhancer per gallon. This mixture has a useable pot life of 3 hours at 70° F and 50% humidity.
This high gloss single component epoxy ester enamel is designed to provide increased resistance to animal fats, oils, diluted acids and alkalies. Performs well when used for general maintenance painting for protecting surfaces in water and waste treatment plants, food processing plants, bottling plants, dairies and other areas exposed to high moisture or humidity.
