This fast dry latex coating is designed for marking traffic lanes on parking lots, airports, warehouses, and shopping centers. For designating parking spaces and other vehicular or foot traffic control markings. Traffic beads may be utilized with this coating to provide reflectorized marking. If beads are to be used they should be dropped into the wet paint immediately after application at a rate of 6 pounds per gallon of paint. This coating may be applied to concrete or asphalt surfaces interior or exterior.
This high heat silicone alkyd coating is designed to protect steel
that is exposed to heat ranges up to 800° F. For best results apply
in a two coat thin film system. This coating system provides excellent weathering. Resists mild industrial fumes and properly cured films will resist thermal shock.
This specially formulated anti-slip aggregate is designed to elevate the foot or wheel on a damp or wet surface, permitting the water to escape instead of causing the foot or wheel to hydroplane. Composed of aluminosilicate, which is very hard, and angular and blocky in shape, this aggregate provides long term durability and excellent slip resistant features. It is lightweight with a specific gravity of 2.5 to 2.6, and offers elasticity to yield under impact pressure. It provides good chemical resistance, is free of silica, spark resistant, and offers high reflectivity, which improves light intensity.
This acrylic coating features easy application, rapid dry and is
blister, alkali fume and fade resistant. Suitable for use as a
primer/sealer or as a protective clear coating over low gloss acrylic
coatings. As a sealer on masonry it reduces water penetration
helping to prevent erosion, efflorescence, chalking, and spalling without changing the natural appearance.
A premium quality, decorative, intumescent, fire retardant paint for interior ceilings, walls, and trim. This product provides a high hiding matte finish that retards flame spread by reacting to heat and forming a thick cellular char blanket (intumescence). Suitable for primed or previously painted wood, drywall, cellulose tile, cured plaster, masonry and metal.
This water thinned coating is a film forming material that chemically
converts rust into a black inert non-corrosive iron complex. This coating provides two step protection in one application. First, it converts tightly adherent rust into a non-rusting black film. Second,
it provides corrosion protection against new rust forming. For maximum performance, product should be topcoated. If not topcoated, leaching could occur if exposed to humidity or moisture.
