<
HP | High Performance Solvents and Prep Products
Benjamin Moore® HP | High Performance Solvents and Prep Products are developed to support the full line of HP primers, enamels, epoxies, and urethanes.
HP Oil & Grease Emulsifier
(HP6000)
Oil & Grease Emulsifier is designed for cleaning walls, floors, equipment, tools, brushes, rollers and spray equipment. This cleaner is extremely effective in removing oil, grease, fats, and other common contaminants, and may also be used for cleaning concrete, asphalt, vinyl, metal, plastic, fibreglass, etc.
- Concentrated and must be mixed with water
- Phosphate-free
- Use on metal, fibreglass, vinyl, and masonry surfaces
- Rinses clean with no residue
- Available Colours: N/A
- Sheen (or Gloss): N/A
- Cleanup: Soap and Water
- Resin Type: N/A
- Recommended Use: Interior, Exterior
- MPI Rating:
- VOC Range: < 250 g/L
HP Anti-Slip Aggregate
(HP6300)
This specially formulated anti-slip aggregate is designed to elevate the foot or wheel on a damp or wet surface, permitting the water to escape instead of causing the foot or wheel to hydroplane.
- Available Colours: N/A
- Sheen (or Gloss): N/A
- Cleanup: N/A
- Resin Type: N/A
- Recommended Use: Interior, Exterior
- MPI Rating:
- VOC Range: < 50 g/L
HP Urethane Reducer
(HP7000)
Urethane Reducer is 100% butyl acetate for use in thinning catalyzed acrylic urethanes. Effective for cleaning equipment immediately after use as well. Do not use this product for cleaning synthetic brushes or rollers, as it will dissolve them.
- For use with all two-part solvent-based urethane coatings
- Effectively cleans tools and equipment
- May be used to reduce and thin coatings up to the legal limits allowed by district
- Available Colours: N/A
- Sheen (or Gloss): N/A
- Cleanup: N/A
- Resin Type: 100% Butyl Acetate
- Recommended Use: Interior, Exterior
- MPI Rating:
- VOC Range: < 1000 g/L
SAFETY DATA SHEETS
HP Brushing Reducer
(HP7010)
Brushing Reducer is a blend of High Flash Naphtha and Mineral Spirits. Use this solvent to improve the brushing characteristics of single-component, solvent-based coatings.
- For use with all alkyd and oil-modified polyurethane coatings
- Effectively cleans tools and equipment
- May be used to reduce and thin coatings up to the legal limits allowed by district
- Available Colours: N/A
- Sheen (or Gloss): N/A
- Cleanup: N/A
- Resin Type: N/A
- Recommended Use: Interior, Exterior
- MPI Rating:
- VOC Range: < 1000 g/L
SAFETY DATA SHEETS
HP Xylene
(HP7030)
Xylene is an aromatic solvent that can be used in numerous industrial coatings systems as a general thinner and clean-up solvent. Use to modify evaporation rates and improve dry. For effective cleaning of tools and equipment.
- Available Colours: N/A
- Sheen (or Gloss): N/A
- Cleanup: N/A
- Resin Type: Xylene
- Recommended Use: Interior, Exterior
- MPI Rating:
- VOC Range: < 1000 g/L
SAFETY DATA SHEETS
HP Epoxy Thinner
(HP7040)
Epoxy Thinner is a carefully balanced combination of the proper solvents for reducing catalyzed epoxy primers and finish coats.
- Available Colours: N/A
- Sheen (or Gloss): N/A
- Cleanup: N/A
- Resin Type: Xylene
- Recommended Use: Interior, Exterior
- MPI Rating:
- VOC Range: < 1000 g/L
SAFETY DATA SHEETS
