Eco Spec® Interior Primer. Item 1 of 6
Eco Spec® Interior Primer
Benjamin Moore
Our Greenest and Lowest Odour Primer
See Product Details- Low odour completely dissipates under an hour after application
- Zero VOCs and zero emissions, even after tinting
- Quick-drying
- Spatter resistant
- Certified Asthma & Allergy Friendly®
Select Fulfilment Method
* Required
This item is currently unavailable.
Eco Spec® is our greenest and lowest odour primer, designed for customers and professionals seeking eco-responsible paints, without compromising performance and quality.
- Low odour completely dissipates under an hour after application
- Zero VOCs and zero emissions, even after tinting
- Quick-drying
- Exhibits excellent holdout properties
- Spatter-resistant
- Certified Asthma & Allergy Friendly®
- Green Seal® Certified
- MPI Extreme Green Performance™ Certified
- Eligible for LEED® v4 Indoor Air Quality Credit
| Key Feature(s) | 1 Part | High Hide | Levelling | Low Odour | Multi-Substrate | Quick Drying | Spatter Resistant | Tintable | Zero VOC | Zero Emissions |
|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | |||||||||
| Recommended For Use On | Drywall, Masonry, Plaster, Wood | |||||||||
| Substrate | Drywall | Masonry | Plaster | Wood | ||||||
| Regulatory | MPI 50 | 50 X-Green™ | 149 | 149 X-Green™ | Eligible for LEED® V4 credit | Qualifies for CHPS low emitting credit | ||||
| Coverage (Sq. Ft./Gal) | 37.2-46.5 sq. m (400-500 sq.ft) | |||||||||
| Number of Recommended Coats | 1 or 2 | |||||||||
| Dry Time | 30-60 Minutes | |||||||||
| Recoat Time | 1-2 Hours | |||||||||
| Full Cure (Days) | 14 | |||||||||
| Resin Vehicle Type | Acrylic, Latex, Waterborne | |||||||||
| Clean Up | Soap and Water | |||||||||
| Volume Solids (±2%) | 31.0 | |||||||||
| WFT: Wet Film Thickness (mils) | 4.0 | |||||||||
| DFT: Dry Film Thickness (mils) | 1.2 | |||||||||
| WPG (Weight per Gallon) | 4.5 kg (10 lbs) | |||||||||
| Applicator | Brush, Roll, Spray | |||||||||
| Application Temp Range (°F) | 10-32 (50-90) | |||||||||
| Application Spray Pressure (PSI) | 1500-2500 | |||||||||
| Segment | Residential | Commercial |
| Recommended For Use On | Drywall, Masonry, Plaster, Wood |
|---|
| Key Feature(s) | 1 Part | High Hide | Levelling | Low Odour | Multi-Substrate | Quick Drying | Spatter Resistant | Tintable | Zero VOC | Zero Emissions |
|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | |||||||||
| Substrate | Drywall | Masonry | Plaster | Wood | ||||||
| Regulatory | MPI 50 | 50 X-Green™ | 149 | 149 X-Green™ | Eligible for LEED® V4 credit | Qualifies for CHPS low emitting credit | ||||
| Coverage (Sq. Ft./Gal) | 37.2-46.5 sq. m (400-500 sq.ft) | |||||||||
| Number of Recommended Coats | 1 or 2 | |||||||||
| Dry Time | 30-60 Minutes | |||||||||
| Recoat Time | 1-2 Hours | |||||||||
| Full Cure (Days) | 14 | |||||||||
| Resin Vehicle Type | Acrylic, Latex, Waterborne | |||||||||
| Clean Up | Soap and Water | |||||||||
| Volume Solids (±2%) | 31.0 | |||||||||
| WFT: Wet Film Thickness (mils) | 4.0 | |||||||||
| DFT: Dry Film Thickness (mils) | 1.2 | |||||||||
| WPG (Weight per Gallon) | 4.5 kg (10 lbs) | |||||||||
| Applicator | Brush, Roll, Spray | |||||||||
| Application Temp Range (°F) | 10-32 (50-90) | |||||||||
| Application Spray Pressure (PSI) | 1500-2500 | |||||||||
| Segment | Residential | Commercial |
Safety Data Sheets
Y372-SDS Y372-00 (English)Technical Data Sheets
Y372-TDS Y372 (English)