Alkyd Zone Marking Paint - White. Item 1 of 1
Alkyd Zone Marking Paint - White
Insl-x
A quick-drying, exterior/interior alkyd line marking paint.
See Product Details- Fast drying
- Use on concrete or asphalt
- Excellent durability
- Good color retention
Sheen
Select Fulfillment Method
* Required
This item is currently unavailable.
A quick-setting traffic paint for marking traffic lanes on streets, highways, parking lots, warehouses and other areas where white parking lot paint, marking paint, line paint, striping paint, road paint, or traffic paint is required.
- For marking traffic lanes on sidewalks, curbs, airport runways, parking lots, warehouses, shops, and garages
- Dries in 30 minutes
- Can be applied with a brush, roller, manual or automatic line markers.
- For use on concrete and asphalt
- Available in White and Yellow
| Key Feature(s) | 1 Part | Quick Drying | Resists Marring | Tinted | Traffic Marking |
|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | ||
| Recommended For Use On | Asphalt, Concrete | ||||
| Surface | Asphalt | Concrete | |||
| VOC Range | < 400 | ||||
| Compliance & Certifications | FED (Federal) | ||||
| Coverage (Sq. Ft./Gal) | 4-inch line:320 | ||||
| Number of Recommended Coats | 1 or 2 | ||||
| Dry Time | 30 Minutes | ||||
| Recoat Time | 4 Hours | ||||
| Return to Service (Days) | 7 | ||||
| Resin Vehicle Type | Alkyd | ||||
| Clean Up | Mineral Spirits | ||||
| Volume Solids (±2%) | 53.5 | ||||
| WFT: Wet Film Thickness (mils) | 15.0 | ||||
| DFT: Dry Film Thickness (mils) | 8.0 | ||||
| WPG (Weight per Gallon) | 12.3 | ||||
| Application Method | Brush | Roll | Spray | ||
| Application Temp Range (°F) | 45-95 | ||||
| Segment | Commercial | ||||
| Project | Garage | Parking Lot | Trim |
| Recommended For Use On | Asphalt, Concrete |
|---|
| Key Feature(s) | 1 Part | Quick Drying | Resists Marring | Tinted | Traffic Marking |
|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | ||
| Surface | Asphalt | Concrete | |||
| VOC Range | < 400 | ||||
| Compliance & Certifications | FED (Federal) | ||||
| Coverage (Sq. Ft./Gal) | 4-inch line:320 | ||||
| Number of Recommended Coats | 1 or 2 | ||||
| Dry Time | 30 Minutes | ||||
| Recoat Time | 4 Hours | ||||
| Return to Service (Days) | 7 | ||||
| Resin Vehicle Type | Alkyd | ||||
| Clean Up | Mineral Spirits | ||||
| Volume Solids (±2%) | 53.5 | ||||
| WFT: Wet Film Thickness (mils) | 15.0 | ||||
| DFT: Dry Film Thickness (mils) | 8.0 | ||||
| WPG (Weight per Gallon) | 12.3 | ||||
| Application Method | Brush | Roll | Spray | ||
| Application Temp Range (°F) | 45-95 | ||||
| Segment | Commercial | ||||
| Project | Garage | Parking Lot | Trim |
Technical Data Sheets
TP-24XX-TDS TP-3424,TP-2410 (English)For California Residents