High Performance Concrete and Metal Epoxy Primer. Item 1 of 1
High Performance Concrete and Metal Epoxy Primer
Benjamin Moore
A two-component penetrating epoxy sealer formulated for use on clean, rusted steel where extensive surface preparation is needed, but not possible.
See Product Details- Low viscosity, penetrating formula
- Bonds to tightly adhered rust
- Seals bare and previously coated surfaces
- 100% solids formula
- Two-component product; Part B required for use.
Select Fulfillment Method
* Required
This item is currently unavailable.
The penetrating properties and extended dry time provides a method of reinforcing rusty steel surfaces, ensuring adhesion of subsequent coatings. This product also exhibits excellent penetration and sealing of masonry substrates.
- For interior and exterior use
- Use on concrete and metal
- Suitable for use in USDA inspected facilities
- View the additional tools for more information
| Key Feature(s) | 2 Part | Bonding | Direct-to-metal | DTM | Dries Clear | Heavy Duty | Industrial | Low VOC | Multi Purpose | Multi-Substrate | Rust Preventative | Sealer |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | |||||||||
| Recommended For Use On | Concrete, Ferrous Metal, Galvanized Metal, Masonry, Metal, Non-Ferrous Metal | |||||||||||
| Surface | Concrete | Ferrous Metal | Galvanized Metal | Masonry | Metal | Non-Ferrous Metal | ||||||
| VOC Range | < 50 | |||||||||||
| Compliance & Certifications | VOC compliant in all regulated areas | |||||||||||
| Coverage (Sq. Ft./Gal) | Concrete: 500-800 | Metal/Previously Coated: 800-1200 | ||||||||||
| Number of Recommended Coats | 1 | |||||||||||
| Dry Time | 12 Hours | |||||||||||
| Recoat Time | 12 Hours | |||||||||||
| Return to Service (Days) | 7 | |||||||||||
| Resin Vehicle Type | Epoxy | |||||||||||
| Clean Up | HP Epoxy Thinner (HP7040) | |||||||||||
| Volume Solids (±2%) | 99.0 | |||||||||||
| WFT: Wet Film Thickness (mils) | 2.0-3.2 | |||||||||||
| DFT: Dry Film Thickness (mils) | 1.3-3.2 | |||||||||||
| WPG (Weight per Gallon) | Mixed: 9 | |||||||||||
| Application Method | Brush | Roll | Spray | |||||||||
| Application Temp Range (°F) | 50-90 | |||||||||||
| Segment | Commercial |
| Recommended For Use On | Concrete, Ferrous Metal, Galvanized Metal, Masonry, Metal, Non-Ferrous Metal |
|---|
| Key Feature(s) | 2 Part | Bonding | Direct-to-metal | DTM | Dries Clear | Heavy Duty | Industrial | Low VOC | Multi Purpose | Multi-Substrate | Rust Preventative | Sealer |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | |||||||||
| Surface | Concrete | Ferrous Metal | Galvanized Metal | Masonry | Metal | Non-Ferrous Metal | ||||||
| VOC Range | < 50 | |||||||||||
| Compliance & Certifications | VOC compliant in all regulated areas | |||||||||||
| Coverage (Sq. Ft./Gal) | Concrete: 500-800 | Metal/Previously Coated: 800-1200 | ||||||||||
| Number of Recommended Coats | 1 | |||||||||||
| Dry Time | 12 Hours | |||||||||||
| Recoat Time | 12 Hours | |||||||||||
| Return to Service (Days) | 7 | |||||||||||
| Resin Vehicle Type | Epoxy | |||||||||||
| Clean Up | HP Epoxy Thinner (HP7040) | |||||||||||
| Volume Solids (±2%) | 99.0 | |||||||||||
| WFT: Wet Film Thickness (mils) | 2.0-3.2 | |||||||||||
| DFT: Dry Film Thickness (mils) | 1.3-3.2 | |||||||||||
| WPG (Weight per Gallon) | Mixed: 9 | |||||||||||
| Application Method | Brush | Roll | Spray | |||||||||
| Application Temp Range (°F) | 50-90 | |||||||||||
| Segment | Commercial |
For California Residents