High Performance Epoxy Mastic - Semi-Gloss. Item 1 of 1
High Performance Epoxy Mastic - Semi-Gloss
Benjamin Moore
Formulated for application direct to properly prepared ferrous and non-ferrous metal, concrete, and other masonry substrates.
See Product Details- High solids and high build
- Surface-tolerant
- Multi-surface
- Hard scratch- and impact-resistant coating
- Two-component product; Part B required for use.
Sheen
Select Fulfillment Method
* Required
This item is currently unavailable.
Epoxy Mastic offers long-term rust prevention and is suitable for use when protecting concrete substrates in secondary containment. Can also be used for immersion applications.
- Suitable for use in USDA inspected facilities
- Use on wide range of surfaces
- Long-term rust prevention
- View the additional tools for more information
| Key Feature(s) | 2 Part | Chemical Resistant | Direct-to-metal | DTM | Heavy Duty | High Build | High Traffic | Industrial | Moisture Blocking | Multi Purpose | Multi-Substrate | Resists Marring | Resists Scratching | Scrubbable | Scuff Resistant | Self Priming | Tintable | Waterproof |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | |||||||||||||||
| Recommended For Use On | Concrete, Ferrous Metal, Masonry, Metal, Non-Ferrous Metal | |||||||||||||||||
| Surface | Concrete | Ferrous Metal | Masonry | Metal | Non-Ferrous Metal | |||||||||||||
| VOC Range | < 250 | |||||||||||||||||
| Compliance & Certifications | FED (Federal) | OTC (Ozone Transport Commission) | OTCII (Ozone Transport Commission (OTC) Phase II) | CARB02 (California Air Regulation Board) | CARB07 (California Air Regulation Board 2007) | CARB19 (California Air Regulation Board 2019) | UTAH (Utah) | AZMC (Arizona Maricopa County) | MPI 101, 116 | |||||||||
| Coverage (Sq. Ft./Gal) | 175 – 275 | |||||||||||||||||
| Recoat Time | 12 Hours | |||||||||||||||||
| Return to Service (Days) | 3 | |||||||||||||||||
| Resin Vehicle Type | Epoxy | |||||||||||||||||
| Clean Up | HP Epoxy Thinner (HP7040) | |||||||||||||||||
| Application Method | Brush | Roll | Spray | |||||||||||||||
| Application Temp Range (°F) | 45 – 100 | |||||||||||||||||
| Application Spray Pressure (PSI) | > 2100 | |||||||||||||||||
| Segment | Commercial | |||||||||||||||||
| Project | Floor |
| Recommended For Use On | Concrete, Ferrous Metal, Masonry, Metal, Non-Ferrous Metal |
|---|
| Key Feature(s) | 2 Part | Chemical Resistant | Direct-to-metal | DTM | Heavy Duty | High Build | High Traffic | Industrial | Moisture Blocking | Multi Purpose | Multi-Substrate | Resists Marring | Resists Scratching | Scrubbable | Scuff Resistant | Self Priming | Tintable | Waterproof |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | |||||||||||||||
| Surface | Concrete | Ferrous Metal | Masonry | Metal | Non-Ferrous Metal | |||||||||||||
| VOC Range | < 250 | |||||||||||||||||
| Compliance & Certifications | FED (Federal) | OTC (Ozone Transport Commission) | OTCII (Ozone Transport Commission (OTC) Phase II) | CARB02 (California Air Regulation Board) | CARB07 (California Air Regulation Board 2007) | CARB19 (California Air Regulation Board 2019) | UTAH (Utah) | AZMC (Arizona Maricopa County) | MPI 101, 116 | |||||||||
| Coverage (Sq. Ft./Gal) | 175 – 275 | |||||||||||||||||
| Recoat Time | 12 Hours | |||||||||||||||||
| Return to Service (Days) | 3 | |||||||||||||||||
| Resin Vehicle Type | Epoxy | |||||||||||||||||
| Clean Up | HP Epoxy Thinner (HP7040) | |||||||||||||||||
| Application Method | Brush | Roll | Spray | |||||||||||||||
| Application Temp Range (°F) | 45 – 100 | |||||||||||||||||
| Application Spray Pressure (PSI) | > 2100 | |||||||||||||||||
| Segment | Commercial | |||||||||||||||||
| Project | Floor |
For California Residents