High Performance Pre-Catalyzed Waterborne Epoxy - Eggshell. Item 1 of 1
High Performance Pre-Catalyzed Waterborne Epoxy - Eggshell
Benjamin Moore
A multi-purpose, single-component waterborne epoxy that blends protection, durability, and easy application.
See Product Details- Efficient, single component formula
- Provides a mildew-resistant coating
- Durable finish for high traffic areas
Sheen
Select Fulfillment Method
* Required
This item is currently unavailable.
A single-component durable coating that resists water and common cleaning chemicals. It's the go-to solution for the most challenging facility environments.
- Single component, no catalyst required
- Waterborne formula with fast dry and recoat times
- Eligible for LEED® v4 credit, CDPH v1 Emission Certified; qualifies for CHPS low emitting credit
- View the sell sheet or additional tools for more information
| Key Feature(s) | Multi-Substrate | Scrubbable | 1 Part | High Traffic | Mold Resistant Coating | Industrial | Tintable | Chemical Resistant | Mildew Resistant Coating | Resists Marring |
|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | |||||||||
| Recommended For Use On | Aluminum, Concrete, Drywall, Galvanized Metal, Masonry, Non-Ferrous Metal, Wood | |||||||||
| Surface | Aluminum | Concrete | Drywall | Galvanized Metal | Masonry | Non-Ferrous Metal | ||||
| VOC Range | < 100 | |||||||||
| Compliance & Certifications | OTC (Ozone Transport Commission) | OTCII (Ozone Transport Commission (OTC) Phase II) | CARB (California Air Regulation Board) | CARB07 (California Air Regulation Board 2007) | UTAH (Utah) | AZMC (Arizona Maricopa County) | Eligible for LEED® v4 | CDPH (California Department of Public Health) | CHPS (Collaborative for High Performance Schools) | MPI 151 |
| Coverage (Sq. Ft./Gal) | 350 – 450 | |||||||||
| Recoat Time | 2 Hours | |||||||||
| Resin Vehicle Type | Acrylic | Epoxy | ||||||||
| Clean Up | Soap and Water | |||||||||
| Application Method | Brush | Roll | Spray | |||||||
| Application Temp Range (°F) | 50 - 90 | |||||||||
| Application Spray Pressure (PSI) | 2,000 – 2,500 | |||||||||
| Segment | Commercial | |||||||||
| Project | Basement | Bathroom | Bathroom Ceiling | Bedroom | Door | Kitchen | Trim |
| Recommended For Use On | Aluminum, Concrete, Drywall, Galvanized Metal, Masonry, Non-Ferrous Metal, Wood |
|---|
| Key Feature(s) | Multi-Substrate | Scrubbable | 1 Part | High Traffic | Mold Resistant Coating | Industrial | Tintable | Chemical Resistant | Mildew Resistant Coating | Resists Marring |
|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | |||||||||
| Surface | Aluminum | Concrete | Drywall | Galvanized Metal | Masonry | Non-Ferrous Metal | ||||
| VOC Range | < 100 | |||||||||
| Compliance & Certifications | OTC (Ozone Transport Commission) | OTCII (Ozone Transport Commission (OTC) Phase II) | CARB (California Air Regulation Board) | CARB07 (California Air Regulation Board 2007) | UTAH (Utah) | AZMC (Arizona Maricopa County) | Eligible for LEED® v4 | CDPH (California Department of Public Health) | CHPS (Collaborative for High Performance Schools) | MPI 151 |
| Coverage (Sq. Ft./Gal) | 350 – 450 | |||||||||
| Recoat Time | 2 Hours | |||||||||
| Resin Vehicle Type | Acrylic | Epoxy | ||||||||
| Clean Up | Soap and Water | |||||||||
| Application Method | Brush | Roll | Spray | |||||||
| Application Temp Range (°F) | 50 - 90 | |||||||||
| Application Spray Pressure (PSI) | 2,000 – 2,500 | |||||||||
| Segment | Commercial | |||||||||
| Project | Basement | Bathroom | Bathroom Ceiling | Bedroom | Door | Kitchen | Trim |
For California Residents