High Performance Universal Metal Primer. Item 1 of 1
High Performance Universal Metal Primer
Benjamin Moore
A high-performance, one-component, quick-dry, rust-inhibitive metal primer formulated for use on ferrous metal substrates.
See Product Details- Fast 30-minute dry – recoat in 4 hours
- Use over many existing coatings
- Corrosion protection on all ferrous metals
- Accepts most top coats
Select Fulfillment Method
* Required
This item is currently unavailable.
The phenolic alkyd resin formulation allows for a wide variety of intermediate and finish coats to be used on ferrous metal substrates.
- Dry to Touch in 30 minutes
- For interior and exterior use
- View the additional tools for more information
| Key Feature(s) | 1 Part | Corrosion Inhibitor | Direct-to-metal | DTM | Industrial | Quick Drying | Rust Preventative | Tinted |
|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | |||||
| Recommended For Use On | Ferrous Metal, Metal | |||||||
| Surface | Ferrous Metal | Metal | ||||||
| VOC Range | < 400 | |||||||
| Compliance & Certifications | OTC (Ozone Transport Commission) | AZMC (Arizona Maricopa County) | FED (Federal) | MPI 76, 79 | CARB (California Air Regulation Board) | *Compliant formula available for VOC restricted areas. | ||
| Coverage (Sq. Ft./Gal) | 350-450 | |||||||
| Number of Recommended Coats | 1 or 2 | |||||||
| Dry Time | 30 Minutes | |||||||
| Recoat Time | 4 Hours | |||||||
| Return to Service (Days) | 7 | |||||||
| Resin Vehicle Type | Alkyd | |||||||
| Clean Up | HP Xylene (HP7030) | |||||||
| Volume Solids (±2%) | 50.0 | |||||||
| WFT: Wet Film Thickness (mils) | 3.6 - 4.6 | |||||||
| DFT: Dry Film Thickness (mils) | 1.8 - 2.3 | |||||||
| WPG (Weight per Gallon) | 11.2 | |||||||
| Application Method | Brush | Roll | Spray | |||||
| Application Temp Range (°F) | 50-90 | |||||||
| Application Spray Pressure (PSI) | 1500-2200 | |||||||
| Segment | Commercial | |||||||
| Project | Door | Garage Door | Roof |
| Recommended For Use On | Ferrous Metal, Metal |
|---|
| Key Feature(s) | 1 Part | Corrosion Inhibitor | Direct-to-metal | DTM | Industrial | Quick Drying | Rust Preventative | Tinted |
|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | |||||
| Surface | Ferrous Metal | Metal | ||||||
| VOC Range | < 400 | |||||||
| Compliance & Certifications | OTC (Ozone Transport Commission) | AZMC (Arizona Maricopa County) | FED (Federal) | MPI 76, 79 | CARB (California Air Regulation Board) | *Compliant formula available for VOC restricted areas. | ||
| Coverage (Sq. Ft./Gal) | 350-450 | |||||||
| Number of Recommended Coats | 1 or 2 | |||||||
| Dry Time | 30 Minutes | |||||||
| Recoat Time | 4 Hours | |||||||
| Return to Service (Days) | 7 | |||||||
| Resin Vehicle Type | Alkyd | |||||||
| Clean Up | HP Xylene (HP7030) | |||||||
| Volume Solids (±2%) | 50.0 | |||||||
| WFT: Wet Film Thickness (mils) | 3.6 - 4.6 | |||||||
| DFT: Dry Film Thickness (mils) | 1.8 - 2.3 | |||||||
| WPG (Weight per Gallon) | 11.2 | |||||||
| Application Method | Brush | Roll | Spray | |||||
| Application Temp Range (°F) | 50-90 | |||||||
| Application Spray Pressure (PSI) | 1500-2200 | |||||||
| Segment | Commercial | |||||||
| Project | Door | Garage Door | Roof |
Safety Data Sheets
CHP1320-SDS CHP1320-01 (English)CHP1320-SDS CHP1320-20 (English)CHP1320-SDS CHP1320-70 (English)HP1320-SDS HP1320-01 (English)HP1320-SDS HP1320-20 (English)HP1320-SDS HP1320-70 (English)CHP1320-SDS CHP1320-01 (Español)CHP1320-SDS CHP1320-20 (Español)CHP1320-SDS CHP1320-70 (Español)HP1320-SDS HP1320-01 (Español)HP1320-SDS HP1320-20 (Español)HP1320-SDS HP1320-70 (Español)Technical Data Sheets
CHP1320-TDS CHP1320 (English)HP1320-TDS HP1320 (English)HP1320-TDS HP1320 (Español)CHP1320-TDS CHP1320 (Español)For California Residents
