High Performance Concrete and Metal Epoxy Primer. Item 1 of 1
High Performance Concrete and Metal Epoxy Primer
Benjamin Moore
A two-component penetrating epoxy sealer formulated for use on clean, rusted steel where extensive surface preparation is needed, but not possible.
See Product Details- Low viscosity, penetrating formula
- Bonds to tightly adhered rust
- Seals bare and previously coated surfaces
- 100% solids formula
- Two-component product; Part B required for use.
Select Fulfilment Method
* Required
This item is currently unavailable.
The penetrating properties and extended dry time provides a method of reinforcing rusty steel surfaces, ensuring adhesion of subsequent coatings. This product also exhibits excellent penetration and sealing of masonry substrates.
- For interior and exterior use
- Use on concrete and metal
- Suitable for use in USDA inspected facilities
- View the additional tools for more information
| Key Feature(s) | 2 Part | Bonding | Direct-to-metal | DTM | Dries Clear | Heavy Duty | Industrial | Low Odor | Low VOC | Miulti Purpose | Multi-Substrate | Rust Preventative | Sealer |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | ||||||||||
| Recommended For Use On | Concrete, Ferrous Metal, Galvanized Metal, Masonry, Metal, Non-Ferrous Metal | ||||||||||||
| Surface | Concrete | Ferrous Metal | Galvanized Metal | Masonry | Metal | Non-Ferrous Metal | |||||||
| VOC Range | < 100 | ||||||||||||
| Compliance & Certifications | VOC compliant in all regulated areas | ||||||||||||
| Coverage (Sq. Ft./Gal) | Concrete: 46.5 – 74.3 sq. m. (500 – 800 Sq. Ft.) | Metal/Previously Coated: 74.3 – 111.5 sq. m. (800 – 1200 Sq. Ft.) | |||||||||||
| Recoat Time | 12 Hours | ||||||||||||
| Resin Vehicle Type | Epoxy | ||||||||||||
| Clean Up | HP Epoxy Thinner (HP7040) | ||||||||||||
| Application Method | Brush | Roll | Spray | ||||||||||
| Application Temp Range (°F) | 10 – 32 °C (50 – 90 °F) | ||||||||||||
| Application Spray Pressure (PSI) | 5-10 | ||||||||||||
| Segment | Commercial |
| Recommended For Use On | Concrete, Ferrous Metal, Galvanized Metal, Masonry, Metal, Non-Ferrous Metal |
|---|
| Key Feature(s) | 2 Part | Bonding | Direct-to-metal | DTM | Dries Clear | Heavy Duty | Industrial | Low Odor | Low VOC | Miulti Purpose | Multi-Substrate | Rust Preventative | Sealer |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | ||||||||||
| Surface | Concrete | Ferrous Metal | Galvanized Metal | Masonry | Metal | Non-Ferrous Metal | |||||||
| VOC Range | < 100 | ||||||||||||
| Compliance & Certifications | VOC compliant in all regulated areas | ||||||||||||
| Coverage (Sq. Ft./Gal) | Concrete: 46.5 – 74.3 sq. m. (500 – 800 Sq. Ft.) | Metal/Previously Coated: 74.3 – 111.5 sq. m. (800 – 1200 Sq. Ft.) | |||||||||||
| Recoat Time | 12 Hours | ||||||||||||
| Resin Vehicle Type | Epoxy | ||||||||||||
| Clean Up | HP Epoxy Thinner (HP7040) | ||||||||||||
| Application Method | Brush | Roll | Spray | ||||||||||
| Application Temp Range (°F) | 10 – 32 °C (50 – 90 °F) | ||||||||||||
| Application Spray Pressure (PSI) | 5-10 | ||||||||||||
| Segment | Commercial |
Technical Data Sheets
HP1550-TDS HP1550FR (English)