Fire Retardant Paint - Flat. Item 1 of 1
Fire Retardant Paint - Flat
Insl-x
A high-quality latex intumescent coating that retards flame spread and minimizes smoke generation.
See Product Details- High hiding decorative finish
- Applies like a regular paint
- For Interior use
- Low VOC
- Soap and water clean-up
Sheen
Select Fulfilment Method
* Required
This item is currently unavailable.
This product provides a high-hiding flat finish that retards flame spread by reacting to heat and forming a thick cellular char blanket (intumescence).
- This product may also be top coated with a conventional acrylic paint without affecting the flame spread rating.
- For use on primed or previously painted wood, drywall, cellulose tile, cured plaster, masonry, or metal
- Slows the spread of fire and smoke
- Available in white
| Key Feature(s) | Tinted | Low VOC | Fire Retardant | High Build | 1 Part | Multi-Substrate | |||
|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | ||||||||
| Recommended For Use On | Ceiling Tile, Drywall, Masonry, Metal, Concrete, Plaster, Composite, Composite Wood, Non-Ferrous Metal | ||||||||
| Surface | Concrete | Drywall | Plaster | Ceiling Tile | Composite | Non-Ferrous Metal | Composite Wood | Metal | Masonry |
| VOC Range | < 50 | ||||||||
| Compliance & Certifications | MPI #64 | Class “A” when tested in accordance with ASTM E84 / UL 723, CAN/ULC S-102 & ASTM E2768 | VOC compliant in all areas | ||||||
| Coverage (Sq. Ft./Gal) | 13.9 sq. m. (150 sq. ft.) | ||||||||
| Number of Recommended Coats | 2 | ||||||||
| Dry Time | 30 Minutes | ||||||||
| Recoat Time | 2 Hours | ||||||||
| Resin Vehicle Type | Latex | Waterborne | Acrylic | ||||||
| Clean Up | Soap and Water | ||||||||
| Application Method | Spray | Brush | Roll | ||||||
| Application Temp Range (°F) | 10-32.2 °C (50-90 °F) | ||||||||
| Segment | Residential | Commercial | |||||||
| Project | Bedroom | Bathroom | Bathroom Ceiling | Ceiling | Basement | Kitchen | Trim | Garage | Living Room |
| Recommended For Use On | Ceiling Tile, Drywall, Masonry, Metal, Concrete, Plaster, Composite, Composite Wood, Non-Ferrous Metal |
|---|
| Key Feature(s) | Tinted | Low VOC | Fire Retardant | High Build | 1 Part | Multi-Substrate | |||
|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | ||||||||
| Surface | Concrete | Drywall | Plaster | Ceiling Tile | Composite | Non-Ferrous Metal | Composite Wood | Metal | Masonry |
| VOC Range | < 50 | ||||||||
| Compliance & Certifications | MPI #64 | Class “A” when tested in accordance with ASTM E84 / UL 723, CAN/ULC S-102 & ASTM E2768 | VOC compliant in all areas | ||||||
| Coverage (Sq. Ft./Gal) | 13.9 sq. m. (150 sq. ft.) | ||||||||
| Number of Recommended Coats | 2 | ||||||||
| Dry Time | 30 Minutes | ||||||||
| Recoat Time | 2 Hours | ||||||||
| Resin Vehicle Type | Latex | Waterborne | Acrylic | ||||||
| Clean Up | Soap and Water | ||||||||
| Application Method | Spray | Brush | Roll | ||||||
| Application Temp Range (°F) | 10-32.2 °C (50-90 °F) | ||||||||
| Segment | Residential | Commercial | |||||||
| Project | Bedroom | Bathroom | Bathroom Ceiling | Ceiling | Basement | Kitchen | Trim | Garage | Living Room |
Safety Data Sheets
FR-210-SDS FR-210F (English)Technical Data Sheets
FR-210-TDS FR-210F (English)