Waterborne Swimming Pool Paint - Semi-Gloss. Item 1 of 1
Waterborne Swimming Pool Paint - Semi-Gloss
Insl-x
Waterborne Swimming Pool Paint can be applied to slightly damp surfaces, dries quickly for recoating, and withstands continuous submersion in fresh or salt water.
See Product Details- Pool Paint
- Quick drying
- For use in pools with fresh, salt, and chlorinated water
- Lasting colour
- Strong protection
Sheen
Select Fulfilment Method
* Required
This item is currently unavailable.
Use Waterborne Swimming Pool Paint over most types of properly prepared existing pool paints.
- Can be applied over existing pool paints if in good condition
- For use on pool and fountains
- Can be applied on well-prepared concrete, marcite, gunite, and other masonry
- Can be applied to slightly damp surfaces
- Withstands continuous submersion in fresh and salt water
| Key Feature(s) | 1 Part | Tintable | Waterproof |
|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior |
| Recommended For Use On | Concrete | ||
| Surface | Concrete | ||
| Compliance & Certifications | VOC compliant in all areas | ||
| Coverage (Sq. Ft./Gal) | 27.9-37.2 sq. m. (300-400 sq. ft.) | ||
| Number of Recommended Coats | 2 | ||
| Dry Time | 30-60 Minutes | ||
| Recoat Time | 4-6 Hours | ||
| Resin Vehicle Type | Latex | Waterborne | |
| Clean Up | Soap and Water | ||
| Application Method | Brush | Roll | Spray |
| Application Temp Range (°F) | 10-32.2°C (50-90 °F) | ||
| Application Spray Pressure (PSI) | 2000 | ||
| Segment | Residential | Commercial | |
| Project | Pool |
| Recommended For Use On | Concrete |
|---|
| Key Feature(s) | 1 Part | Tintable | Waterproof |
|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior |
| Surface | Concrete | ||
| Compliance & Certifications | VOC compliant in all areas | ||
| Coverage (Sq. Ft./Gal) | 27.9-37.2 sq. m. (300-400 sq. ft.) | ||
| Number of Recommended Coats | 2 | ||
| Dry Time | 30-60 Minutes | ||
| Recoat Time | 4-6 Hours | ||
| Resin Vehicle Type | Latex | Waterborne | |
| Clean Up | Soap and Water | ||
| Application Method | Brush | Roll | Spray |
| Application Temp Range (°F) | 10-32.2°C (50-90 °F) | ||
| Application Spray Pressure (PSI) | 2000 | ||
| Segment | Residential | Commercial | |
| Project | Pool |