High Performance Rapid Dry Alkyd Enamel - Gloss. Item 1 of 1
High Performance Rapid Dry Alkyd Enamel - Gloss
Benjamin Moore
A high-performance, quick-dry, rust-preventive enamel formulated for use on properly prepared ferrous and non-ferrous metal substrates.
See Product Details- Tack-free in 10 minutes- recoat in 2 hours
- Hard, scratch- and impact resistant coating
- For shop and OEM spray applications only
Sheen
Select Fulfilment Method
* Required
This item is currently unavailable.
Excellent for use in shop application environments and is ideal for the industrial and metal fabrication markets.
- Gloss finish
- Fast drying
- Self-priming
| Key Feature(s) | 1 Part | Direct-to-metal | DTM | Industrial | Self Priming | Tintable | Tinted |
|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | ||||
| Recommended For Use On | Ferrous Metal, Metal | ||||||
| Surface | Ferrous Metal | Metal | |||||
| VOC Range | < 600 | ||||||
| Compliance & Certifications | OEM/SHOP USE ONLY | MPI 96 | |||||
| Coverage (Sq. Ft./Gal) | 32.5 – 41.8 sq. m. (350 – 450 Sq. Ft.) | ||||||
| Resin Vehicle Type | Alkyd | ||||||
| Clean Up | HP Brushing Reducer (HP7010) | ||||||
| Application Method | Spray | ||||||
| Application Temp Range (°F) | 10 – 32.2 °C (50 – 90 °F) | ||||||
| Application Spray Pressure (PSI) | 2,200 – 2,500 PSI | ||||||
| Segment | Commercial |
| Recommended For Use On | Ferrous Metal, Metal |
|---|
| Key Feature(s) | 1 Part | Direct-to-metal | DTM | Industrial | Self Priming | Tintable | Tinted |
|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | ||||
| Surface | Ferrous Metal | Metal | |||||
| VOC Range | < 600 | ||||||
| Compliance & Certifications | OEM/SHOP USE ONLY | MPI 96 | |||||
| Coverage (Sq. Ft./Gal) | 32.5 – 41.8 sq. m. (350 – 450 Sq. Ft.) | ||||||
| Resin Vehicle Type | Alkyd | ||||||
| Clean Up | HP Brushing Reducer (HP7010) | ||||||
| Application Method | Spray | ||||||
| Application Temp Range (°F) | 10 – 32.2 °C (50 – 90 °F) | ||||||
| Application Spray Pressure (PSI) | 2,200 – 2,500 PSI | ||||||
| Segment | Commercial |