<

Corotech® Cleaning, Solvents and Specialty Products

Along with cleaning and solvent products, Corotech offers block fillers for masonry and anti-slip aggregate for floor coatings.

Alkyd Gloss and Hardness Catalyst

Alkyd Gloss and Hardness Catalyst


(V705)

Alkyd Gloss and Hardness Catalyst speeds drying while producing a higher gloss and more corrosion resistance, as well as a harder enamel finish. Other benefits include increased solvent and chemical resistance.

For helpful information, check out our tools and resources page

Colorant Used: N/A
Colour System Supported: N/A

  • Available Colours: N/A
  • Sheen (or Gloss): N/A
  • Cleanup: N/A
  • Resin Type: Isocyanate
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 615.0
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
Anti-Slip Aggregate

Anti-Slip Aggregate


(V630)

This specially formulated anti-slip aggregate is designed to elevate the foot or wheel on a damp or wet surface, permitting the water to escape instead of causing the foot or wheel to hydroplane.

For helpful information, check out our tools and resources page

Colorant Used: N/A
Colour System Supported: N/A

  • Available Colours: Clear
  • Sheen (or Gloss): N/A
  • Cleanup: N/A
  • Resin Type: N/A
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level:
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
Brushing Reducer

Brushing Reducer


(V701)

Brushing Reducer is a blend of High Flash Naphtha and Mineral Spirits. Use this solvent to improve the brushing characteristics of single-component, solvent-based coatings.

  • For use with all alkyd and oil-modified polyurethane coatings
  • Effectively cleans tools and equipment
  • May be used to reduce and thin coatings up to the legal limits allowed by district
  • For helpful information, check out our tools and resources page

Colorant Used: N/A
Colour System Supported: N/A

  • Available Colours: N/A
  • Sheen (or Gloss): N/A
  • Cleanup: N/A
  • Resin Type: N/A
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 787.0
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
Coal Tar Epoxy

Coal Tar Epoxy

Flat
(V157)

Coal Tar Epoxy is a high-solids, two-component tar filled coating formulated to provide excellent film build in one or two coats. The high level of cross-linking provides an excellent barrier coat for immersion service in fresh water, salt water or waste water. Additionally, this product is resistant to many acids, alkalis and mild solvents in splash and spill exposures.

  • Formulated for use over properly prepared/primed steel, iron, concrete, and non-ferrous metal
  • Provides excellent protection from water, acids, alkalis, and mild solvents
  • Can be applied directly to the substrate; use with a primer for extra longevity
  • Suitable for use in USDA inspected facilities
  • Meets Performance Requirements for Army Corps of Engineers C-200
  • Meets Performance Requirements for SSPC Paint 16
  • Meets Performance Requirements for DOD-P-23236
  • For helpful information, check out our tools and resources page

Colorant Used: N/A
Colour System Supported: N/A

  • Available Colours: Black
  • Sheen (or Gloss): Flat
  • Cleanup: Solvent
  • Resin Type: Polyamide Epoxy / Coal Tar
  • Recommended Use: Interior, Exterior
  • MPI Rating: 35
  • VOC Level: 250.0
TECHNICAL DATA SHEETS
Epoxy Thinner

Epoxy Thinner


(V704)

Epoxy Thinner is a carefully balanced combination of the proper solvents for reducing catalyzed epoxy primers and finish coats.

For helpful information, check out our tools and resources page

Colorant Used: N/A
Colour System Supported:N/A

  • Available Colours: N/A
  • Sheen (or Gloss): N/A
  • Cleanup: N/A
  • Resin Type: N/A
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 832.0
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
Oil & Grease Emulsifier

Oil & Grease Emulsifier


(V600)

Oil & Grease Emulsifier is designed for cleaning walls, floors and equipment. This cleaner is extremely effective in removing oil, grease, fats, blood and animal by-products. It may also be used for cleaning concrete, asphalt, vinyl, metal, plastic, fibreglass, etc.; it is also very effective for cleaning equipment, tools, brushes, rollers and spray equipment.

  • Concentrated and must be mixed with water
  • Biodegradable and phosphate-free
  • Use on metal, fibreglass, vinyl, and masonry surfaces
  • Rinses clean with no residue
  • For helpful information, check out our tools and resources page

Colorant Used: N/A
Colour System Supported: N/A

  • Available Colours: N/A
  • Sheen (or Gloss): N/A
  • Cleanup: Soap and Water
  • Resin Type: N/A
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 157.0
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
Rust Arrestor

Rust Arrestor

Low Sheen
(V180)

Rust Arrestor is a water-based, film-forming primer that chemically transforms rust, halting the corrosion process and enabling the surface to accept a topcoat. When applied over tightly adhering rust, it forms a black, protective film.

  • Chemically converts rust to inhibit corrosion
  • Forms a tight chemical bond to rusted surfaces
  • Penetrates into tight areas
  • Suitable for use in USDA inspected facilities
  • Can be top coated with latex, alkyd, urethane, or epoxy finishes
  • For helpful information, check out our tools and resources page

Colorant Used: N/A
Colour System Supported: N/A

  • Available Colours: N/A
  • Sheen (or Gloss): Low Sheen
  • Cleanup: Soap and Water
  • Resin Type: Latex
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 98.0
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
Urethane Reducer

Urethane Reducer


(V700)

Urethane Reducer is 100% butyl acetate for use in thinning catalyzed acrylic urethanes. Effective for cleaning equipment immediately after use as well. Do not use this product for cleaning synthetic brushes or rollers, as it will dissolve them.

  • For use with all two-part solvent-based urethane coatings
  • Effectively cleans tools and equipment
  • May be used to reduce and thin coatings up to the legal limits allowed by district
  • For helpful information, check out our tools and resources page

Colorant Used: N/A
Colour System Supported: N/A

  • Available Colours: N/A
  • Sheen (or Gloss): N/A
  • Cleanup: N/A
  • Resin Type: 100% Butyl Acetate
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 880.0
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
Xylene

Xylene


(V703)

Xylene is an aromatic solvent that can be used in numerous industrial coatings systems as a general thinner and clean-up solvent. Use to modify evaporation rates and improve dry. For effective cleaning of tools and equipment.

For helpful information, check out our tools and resources page

Colorant Used: N/A
Colour System Supported: N/A

  • Available Colours: N/A
  • Sheen (or Gloss): N/A
  • Cleanup: N/A
  • Resin Type: Xylene
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 868.0
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS

More Tools

Dinner plates in variety of bright colours against yellow wall

Find Your Colour

Our colour finder gives you several inspirational starting points.

Paint Calculator

Paint Calculator

Tell us the dimensions of the room, and we’ll tell you how much paint to buy.

Step-by-Step Guides.

Step-by-Step Guides

Explore how to get your next DIY project done–and done right.