<
Flat
Low Sheen
Low Sheen
Satin
Semi-Gloss
Satin
Flat
INSL-X® Floor and Masonry Coatings
Durability, safety and beauty are important features of floor coatings, and INSL-X® has a portfolio of floor coatings to help homeowners, professional painters and property managers maintain their flooring surfaces. Garages, basements, porches, patios and more can all be improved with INSL-X® Floor Coatings.
WaterBlock® Acrylic Masonry Waterproofer
Flat
(AMW-1000)
WaterBlock® Acrylic Masonry Waterproofer is designed to seal interior and exterior masonry surfaces such as basement walls, foundations, and retaining walls. WaterBlock is alkali-resistant and provides positive sealing and waterproofing over bare concrete block, brick, stucco, or tilt-up concrete walls.
- Seals vertical masonry surfaces
- Withstands up to 12 psi hydrostatic pressure (when used properly)
- Provides a mold- and mildew-resistant coating
- Alkali-resistant
- View the sell sheet for more information
- Available Colors: White
- Sheen (or Gloss): Flat
- Cleanup: Soap and Water
- Resin Type: Latex
- Recommended Use: Interior, Exterior
- MPI Rating:
- VOC Range: < 100 g/L
SAFETY DATA SHEETS
TuffCrete® Waterborne Acrylic Concrete Stain
Low Sheen
(CST-2XXX)
TuffCrete® Waterborne Acrylic Concrete Stain is a water-reduced acrylic concrete coating designed for application to interior or exterior masonry surfaces. It can be applied in one coat as a stain, or in two coats for an opaque finish.
- Waterborne acrylic formula
- Color fade resistance
- Fast-drying
- Rugged, durable finish
- Resists detergents, oils, grease, and scrubbing
- For interior or exterior masonry surfaces
- View the sell sheet for more information
- Available Colors: Tintable White, Clear (High Gloss), Gray Pearl, Light Gray, Tile Red, Desert Sand, Saddle Brown, Deep Base, Neutral Base
- Sheen (or Gloss): Low Sheen
- Cleanup: Soap and Water
- Resin Type: Acrylic
- Recommended Use: Interior, Exterior
- MPI Rating: 58
- VOC Range: < 250 g/L
SAFETY DATA SHEETS
- SDS CCST-2110 (English)
- SDS CCST-2112 (English)
- SDS CCST-2190 (English)
- SDS CCST-2308 (English)
- SDS CCST-2310 (English)
- SDS CCST-2505 (English)
- SDS CCST-2922 (English)
- SDS CCST-2998 (English)
- SDS CST-2100 (English)
- SDS CST-2110 (English)
- SDS CST-2112 (English)
- SDS CST-2190 (English)
- SDS CST-2308 (English)
- SDS CST-2310 (English)
- SDS CST-2505 (English)
- SDS CST-2789 (English)
- SDS CST-2922 (English)
- SDS CST-2998 (English)
TECHNICAL DATA SHEETS
SAFETY DATA SHEETS
- SDS CCST-2110 (Español)
- SDS CCST-2112 (Español)
- SDS CCST-2190 (Español)
- SDS CCST-2308 (Español)
- SDS CCST-2310 (Español)
- SDS CCST-2505 (Español)
- SDS CCST-2922 (Español)
- SDS CCST-2998 (Español)
- SDS CST-2100 (Español)
- SDS CST-2110 (Español)
- SDS CST-2112 (Español)
- SDS CST-2190 (Español)
- SDS CST-2308 (Español)
- SDS CST-2310 (Español)
- SDS CST-2505 (Español)
- SDS CST-2789 (Español)
- SDS CST-2922 (Español)
- SDS CST-2998 (Español)
TuffCrete® Solvent Acrylic Concrete Waterproofing Stain
Low Sheen
(CST-5XXX)
TuffCrete® Solvent Acrylic Concrete Waterproofing Stain is a solvent-borne acrylic concrete stain designed for deep penetration into concrete surfaces. With excellent adhesion, this product delivers outstanding durability in a low-sheen finish that helps to hide surface defects. It can be applied in one coat as a stain, or in two coats for an opaque finish.
- Excellent adhesion
- Durable low-sheen finish
- Color fade resistance
- Quick-drying
- Deep concrete penetration
- Superior wear resistance
- View the sell sheet for more information
- Available Colors: Clear (High Gloss), Tintable White, Gray Pearl, Light Gray, Tile Red, Terracotta, Desert Sand, Saddle Brown, Neutral Base
- Sheen (or Gloss): Low Sheen
- Cleanup: Solvent
- Resin Type: Acrylic
- Recommended Use: Interior, Exterior
- MPI Rating: 58, 104
- VOC Range: > 250 g/L
Tough Shield® Porch & Floor Coating
Satin
(NTS-3XXX)
Tough Shield® is a waterborne acrylic enamel with excellent adhesion that provides a tough, durable finish for porches, patios, walkways, and steps in residential and commercial settings. It is formulated for use on properly prepared concrete, masonry, metal, and wood.
- Excellent durability and wearing qualities
- Good abrasion resistance
- For interior and exterior use
- Resists weather and ponding water
- Ready for light foot traffic in 24 hours
- Full return to service in 5 to 7 days
- Withstands detergents, oils, grease, and scrubbing
- View the sell sheet for more information
- Available Colors: Tile Red (3105), Knight Gray (3107), Welded Gray (3111), Black (3120), Desert Sand (3122), Saddle Brown (3198)
- Sheen (or Gloss): Satin
- Cleanup: Soap and Water
- Resin Type: Modified Acrylic
- Recommended Use: Interior, Exterior
- MPI Rating: N/A
- VOC Range: < 50 g/L
Decorative Floor Flakes
(EGF-XXX)
Easy to use and available in seven different color combinations, these flakes can disguise surface imperfections and help hide dirt.
- Colorfast, UV stable pigments
- Optimal flexibility and strength
- Easy-to-use sprinkle top
- Available Colors: Red Blend, Blue Blend, Brown Blend, Gray Blend, Silver Metallic, Gold Metallic, Black
- Sheen (or Gloss): N/A
- Cleanup: Soap and Water
- Resin Type: Vinyl Acrylic
- Recommended Use: Interior, Exterior
- MPI Rating:
- VOC Range:
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
GarageGuard®
Semi-Gloss
(EGG-XXX)
GarageGuard® is a water-based, catalyzed epoxy that delivers superior chemical, abrasion, and impact resistance in a durable, semi-gloss coating. Ideal for garage floors, basement floors, and other concrete surfaces. GarageGuard® is cross-linked for outstanding hardness and chemical resistance.
- Waterborne 2-part epoxy
- Durable semi-gloss finish
- Will not lift existing coatings
- Resists hot tire pickup from cars
- Recoat in 8 hours
- Park vehicles in 3-5 days
- View the sell sheet for more information
- Available Colors: Showroom Gray, Desert Sand, Tint Base, Neutral Base
- Sheen (or Gloss): Semi-Gloss
- Cleanup: Soap and Water
- Resin Type: Amine Adduct Epoxy
- Recommended Use: Interior
- MPI Rating:
- VOC Range: < 250 g/L
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
GarageGuard® 1-Part Concrete & Garage Floor Paint
Satin
(CG-3XXX)
GarageGuard® 1-Part is a ready-to-use acrylic epoxy floor paint for multiple surfaces, including concrete, masonry, stucco, cinder block, and brick. Use it on garage floors, basement floors, utility and storage room floors, and driveways.
- Satin finish for interior/exterior use
- Resists hot tire pickup
- Self-priming formula
- Withstands chemical cleaners, water, and oil
- Ready for parked vehicles in 3-5 days
- View the sell sheet for more information
- Available Colors: Knight Gray (3007), Welded Gray (3011), Desert Sand (3022)
- Sheen (or Gloss): Satin
- Cleanup: Soap and Water
- Resin Type: Modified Acrylic
- Recommended Use: Interior, Exterior
- MPI Rating: N/A
- VOC Range: < 50 g/L
SAFETY DATA SHEETS
TECHNICAL DATA SHEETS
Sure Step® Acrylic Anti-Slip Coating
Flat
(NSU-10XX)
Sure Step® Acrylic Anti-Slip Coating provides a durable, skid-resistant finish for interior or exterior application. Imparts excellent color retention, abrasion resistance, and resistance to ponding water. Sure Step is water-reduced, which allows for fast-drying, easy application, and easy clean up.
- High traffic resistance
- Ideal for stairs, walkways, patios, and more
- Fast-drying
- Durable
- Easy application
- Interior/exterior use
- Fills and seals minor surface cracks
- View the sell sheet for more information
- Available Colors: Knight Gray (1007), Welded Gray (1011), Tile Red (1005), Pine Green (1089), Desert Sand (1022), Saddle Brown (1098)
- Sheen (or Gloss): Flat
- Cleanup: Soap and Water
- Resin Type: 100% Acrylic
- Recommended Use: Interior, Exterior
- MPI Rating:
- VOC Range: < 50
Multi-Surface Waterproofer
(WPS-1000)
Multi-Surface Waterproofer is a penetrating, siloxane-based water repellent. Once fully absorbed and dry, this clear waterproofer will seal and protect the surface without changing its visual appearance or texture.
- Protects and Seals: Wood, Concrete, Stucco, Brick, Masonry
- Dries clear with no visible change to substrate
- Penetrating Siloxane Based Formula
- View the sell sheet for more information
- Available Colors: Clear
- Sheen (or Gloss): N/A
- Cleanup: Soap and Water
- Resin Type: Siloxane
- Recommended Use: Interior, Exterior
- MPI Rating:
- VOC Range: < 50 g/L
Tynex® Nylon Professional Paint Brushes
This Tynex® nylon soft blend brush provides an ultra-smooth finish and is designed to work best with Benjamin Moore interior or exterior latex and oil-based paints, stains, and primers. Each brush is tipped and flagged to provide superior results and long lasting performance.
Polyamide Professional Roller Covers
For use with Benjamin Moore paints and stains. This exclusive European polyamide fabric is designed for high capacity and low paint spatter.
SAFETY DATA SHEETS
