<

Corotech® High-Performance Epoxies

100% Solids Epoxy Floor Coating

100% Solids Epoxy Floor Coating

Gloss (V430)

Heavy-duty protection from a 100% solids epoxy for demanding industrial/commercial environments exposed to heavy vehicular and pedestrian traffic, constant moisture, intermittent strong chemical spills, and frequent cleaning with chemicals, steam and power washers.

  • Self-levelling, high-build 100% solids formula
  • Very low VOC
  • Tenacious adhesion to concrete
  • Outstanding durability
  • Smooth gloss finish
  • Meets qualifications for LEED as a floor coating
  • Suitable for use in USDA inspected facilities

Colorant Used: Ready Mixed Colours Only
Colour System Supported: Ready Mixed Colours Only

  • Available Colours: Clear, White, Terracotta, Sandstone, Silver Gray and Battleship Gray
  • Sheen (or Gloss): Gloss
  • Cleanup: Solvent
  • Resin Type: 2-Component Cycloaliphatic Amine Epoxy
  • Recommended Use: Interior
  • MPI Rating:
  • VOC Level: 13.0
SEE DETAILS HIDE DETAILS
Epoxy Mastic Coating

Epoxy Mastic Coating

Semi-Gloss (V160)

Epoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack.

  • High solids (79%) and high build – excellent for corners, crevices and welds
  • Surface-tolerant mastic for marginal substrates
  • Hard scratch- and impact-resistant coating
  • Excellent for secondary containment
  • Qualifies for LEED credits
  • Suitable for use in USDA inspected facilities

Colorant Used: Industrial
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner

  • Available Colours: Tintable White, Deep Base and Clear Base
  • Sheen (or Gloss): Semi-Gloss
  • Cleanup: Solvent
  • Resin Type: Polyamide Epoxy
  • Recommended Use: Interior, Exterior
  • MPI Rating: 116
  • VOC Level: 184.0
SEE DETAILS HIDE DETAILS
Epoxy Patch Kit

Epoxy Patch Kit

(V165)

Epoxy Patch Kit is a 100% solids epoxy co-polymer matrix for repairing and patching interior concrete floors. It sets rapidly with extremely high initial strength and is ready for foot traffic in 5-8 hours. This easy-to-use 3-part system includes liquid part A, liquid catalyst and aggregate.

  • 3-part system allows on-site mixing to the exact consistency needed
  • High Solids with no shrinkage
  • For any high-traffic floor
  • Non Flammable with no odour
  • Trowels easily

Colorant Used: N/A
Colour System Supported: N/A

  • Available Colours: Clear (Appears grey when mixed with aggregate)
  • Sheen (or Gloss): N/A
  • Cleanup: Solvent
  • Resin Type: 2-Component Modified Amine Epoxy
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 30.0
TECHNICAL DATA SHEETS
SEE DETAILS HIDE DETAILS
Fast Dry Polyamide Epoxy Coating

Fast Dry Polyamide Epoxy Coating

Satin (V410)

Fast Dry Polyamide Epoxy is a unique satin sheen epoxy that cures fully in
24 hours at 25 °C (77 °F). In addition, this product cures in temperatures as low as 0 °C (32 °F) in approximately 5 days. Fast Dry Polyamide Epoxy may be used as a high durability floor finish that can be put into service 24 hours after coating application when applied at 25 °C (77 °F).

  • Fast cure and low temp applications
  • Excellent for all metal and masonry surfaces
  • Excellent acid and chemical resistance
  • Hard, scratch and impact resistant coating
  • Suitable for use in USDA inspected facilities
  • Available Colours: White
  • Sheen (or Gloss): Satin
  • Cleanup: Solvent
  • Resin Type: Polyamide Epoxy
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 241.0
TECHNICAL DATA SHEETS
SEE DETAILS HIDE DETAILS
Polyamide Epoxy Coating

Polyamide Epoxy Coating

Gloss (V400)

Polyamide Epoxy Coating is a multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and other industrial and commercial substrates requiring a durable coating in severe environments. Floors: moderate- to heavy-duty performance in commercial/industrial environments exposed to heavy foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning. Metal: excellent for use on ferrous metals, non-ferrous metals and galvanized metal.

  • Highly cross-linked film for toughness and durability
  • Resists many chemicals and solvents
  • Medium build epoxy
  • Suitable for immersion
  • Suitable for use in USDA inspected facilities

Colorant Used: Industrial
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner

  • Available Colours: Clear, White, Black, Pearl Gray, Silver Gray, Battleship Gray, Safety Yellow, and Safety Red; Tintable White, Deep Base, and Clear Base
  • Sheen (or Gloss): Gloss
  • Cleanup: Solvent
  • Resin Type: 2-Component Polyamide Epoxy
  • Recommended Use: Interior, Exterior
  • MPI Rating: 82, 98 (Gloss sheen) and 108, 177 (Semi-Gloss sheen)
  • VOC Level: 326.0
SEE DETAILS HIDE DETAILS
Waterborne Acrylic Epoxy

Waterborne Acrylic Epoxy

Gloss (V450)

Waterborne Acrylic Epoxy is a two-component epoxy that offers unique features such as low odour and application over slightly damp surfaces. For use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces that are subject to moderate abrasion or mild chemical exposures. Not recommended as a heavy-duty floor finish.

Colorant Used: Universal
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner

  • Available Colours: Clear and White; Pastel Base, Tint Base, Deep Base, and Clear Base
  • Sheen (or Gloss): Gloss
  • Cleanup: Soap and Water
  • Resin Type: Acrylic Epoxy
  • Recommended Use: Interior, Exterior
  • MPI Rating:
  • VOC Level: 168.0
SEE DETAILS HIDE DETAILS
Waterborne Amine Epoxy

Waterborne Amine Epoxy

Gloss (V440)

Waterborne Amine Epoxy is formulated to provide good chemical, abrasion and impact resistance on a variety of commercial and industrial surfaces, including steel, iron, concrete, non-ferrous metals, wood and drywall. Particularly suited for use on concrete floors. This waterborne product has lower odour than solvent based epoxies, is easy to apply, and thus can be applied in occupied areas. Additionally, this product can be applied to many existing generic coating types with less risk of lifting or wrinkling.

When used on floors, this product provides moderate- to heavy-duty protection in commercial environments exposed to frequent foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild chemicals, occasional steam cleaning, and powerwashing.

  • Water cleanup, low odour, fast dry
  • Easy application with excellent adhesion
  • Very good resistance to water and chemicals
  • Excellent for use on basement floors
  • Meets qualifications for LEED when used over metal substrates
  • Suitable for use in USDA inspected facilities

Colorant Used: Universal
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner

  • Available Colours: Clear, White, Terracotta, Sandstone, Silver Gray, and Battleship Gray; Pastel Base, Tint Base, Deep Base, and Clear Base
  • Sheen (or Gloss): Gloss
  • Cleanup: Soap and Water
  • Resin Type: 2-Component Amine Adduct Epoxy
  • Recommended Use: Interior
  • MPI Rating:
  • VOC Level: 206.0
SEE DETAILS HIDE DETAILS

MORE TOOLS

Dinner plates in variety of bright colours against yellow wall

FIND YOUR COLOUR

Our colour finder gives you several inspirational starting points.

GO
Paint Calculator

Paint Calculator

Tell us the dimensions of the room, and we’ll tell you how much paint to buy.

GO